[PRR-talk] Bowser

[Sam Vastano]

Kenny,
 
I have built many Bowser and the first one is the hardest... Trying to understand the directions are sometimes a bit difficult but there are many of us out here that have done them before and can answer any questions that you might have. I am in the middle of re-motoring & re-gearing 2 Bowser 2-8-0's for someone with NWSL motors and gearboxes. It can be trying to do the first one if these also but like anything patience and practice always helps! If you detail the Bowser's out you can have a nice looking and good running engine. If you have any questions feel free to ask!
 
Sam Vastano > --- kenneth broomfield <newtmachineworks at yahoo.com>> wrote:> > > Has anyone built a Bowser steam Kit? Is there any> > kind of advice for someone who has not done one yet?> > What tools should I have on hand to accomplish,> > drill bits, tap and die set. I have the standard> > model RR tools but not much more. I am wanting to do> > an H-9. I would also like to super detail it as much> > as I can. Should I super first than paint or the> > paint everything individually? Is there anything> > that I should change that is "wrong" for it to be> > better Pennsy? I have heard people talk about> > putting a can motor in one? Is that hard to do? Any> > mods I would have to make to the frame or kit? Also> > what can motor should I get or do they, Bowser, have> > a kit for that as well?> > > > Kenny Broomfield> > > >> > > ____________________________________________________________________________________> Never miss a thing. Make Yahoo your home page. > http://www.yahoo.com/r/hs> _______________________________________________> PRR-talk mailing list> PRR-talk at dsop.com> http://dsop.com/mailman/listinfo/prr-talk
_________________________________________________________________
i’m is proud to present Cause Effect, a series about real people making a difference.
http://im.live.com/Messenger/IM/MTV/?source=text_Cause_Effect
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://dsop.com/pipermail/prr-talk/attachments/20080101/a4367fc7/attachment.html